Operating Instructions
Table Of Contents
- Table of Contents
- General instructions
- Overviews
- Displays
- Operation
- Ignition switch/steering lock
- Ignition with Keyless Ride
- Emergency-off switch
- Lighting
- Dynamic Traction Control (DTC)
- Electronic chassis and suspension adjustment (D-ESA)
- Riding mode
- Cruise control
- Distance control (ACC)
- Hill Start Control
- Anti-theft alarm system (DWA)
- Tire pressure control (RDC)
- Heating
- Storage compartment
- Central locking system
- Cases
- TFT display
- Audio system
- Setting
- Riding
- Technology in detail
- Maintenance
- Accessories
- Care
- Technical data
- Service
- Appendix
- Index

67
Ignition can be switched off.
To switch off the hazard
warning flasher, switch on
the ignition, as required, and
press button 1 once again.
Turn indicators
Switching on the ignition
( 58).
Press button 1 to the left to
switch on the left-side turn
indicators.
Press button 1 to the right to
switch on the right-side turn
indicators.
Move button 1 to the center
position to switch off the turn
indicators.
Comfort turn indicators
When button 1 is pushed to
the right or left, the turn indi-
cators automatically turn off
under the following conditions:
Speed is under 18 mph
(30 km/h): after distance of
165 ft (50 m) is covered.
Speed is between 18 mph
and 60 mph (30 km/h and
100 km/h): after a speed-de-
pendent distance is covered
or during acceleration.
Speed is above 60 mph
(100 km/h): after turn
indicator flashes five times.
When button 1 is pushed
to the right or left and held
slightly longer, the turn
indicators will only turn off
automatically after the speed-
dependent distance is covered.










