Operating Instructions
Table Of Contents
- Table of Contents
- General instructions
- Overviews
- Displays
- Operation
- Ignition switch/steering lock
- Ignition with Keyless Ride
- Emergency-off switch
- Lighting
- Dynamic Traction Control (DTC)
- Electronic chassis and suspension adjustment (D-ESA)
- Riding mode
- Cruise control
- Distance control (ACC)
- Hill Start Control
- Anti-theft alarm system (DWA)
- Tire pressure control (RDC)
- Heating
- Storage compartment
- Central locking system
- Cases
- TFT display
- Audio system
- Setting
- Riding
- Technology in detail
- Maintenance
- Accessories
- Care
- Technical data
- Service
- Appendix
- Index

239
Bluetooth connection is disrupted.
Possible cause Remedy
Bluetooth connection to the
mobile end device is inter-
rupted.
Switch off energy saving
mode.
Bluetooth connection to the
helmet is interrupted.
Switch off the communication
system of the helmet and con-
nect again after one to two
minutes.
Bluetooth connection inter-
rupted.
The temperature of the TFT
display is too high. Bluetooth
is deactivated. The brightness
of the TFT display is reduced.
Avoid direct sunlight on the
TFT display. Do not continue
riding until components have
cooled down.
Volume in the helmet cannot
be adjusted.
Switch off the communication
system of the helmet and con-
nect again after one to two
minutes.
Volume in helmet is too low. Set volume for media and con-
versations to maximum on the
mobile end device.
TFT display faulty.
Possible cause Remedy
TFT display brightness re-
duced.
The temperature of the TFT
display is too high. The bright-
ness of the TFT display is re-
duced. Avoid direct sunlight
on the TFT display. Do not
continue riding until compo-
nents have cooled down.










