Operating Instructions
Table Of Contents
- Table of Contents
- General instructions
- Overviews
- Displays
- Operation
- Ignition switch/steering lock
- Ignition with Keyless Ride
- Emergency-off switch
- Lighting
- Dynamic Traction Control (DTC)
- Electronic chassis and suspension adjustment (D-ESA)
- Riding mode
- Cruise control
- Distance control (ACC)
- Hill Start Control
- Anti-theft alarm system (DWA)
- Tire pressure control (RDC)
- Heating
- Storage compartment
- Central locking system
- Cases
- TFT display
- Audio system
- Setting
- Riding
- Technology in detail
- Maintenance
- Accessories
- Care
- Technical data
- Service
- Appendix
- Index
226 ACCESSORIES
Closing the topcase
Pull release lever 2 all the way
up.
Close topcase lid and hold it
down. Ensure that no objects
are trapped between cover
and case.
You can also lock the top-
case by turning the lock to
the LOCK position. Under such
circumstances, ensure that the
key is not in the topcase.
Press release lever 2 down
until it engages.
Turn key in topcase lock to
the LOCK position and re-
move.
Removing the topcase
Removing the rider's seat
( 140).
Removing passenger seat
( 141).
Disconnect the plug connec-
tion 1.
Thread out the connector
from the topcase to the rear.
Open topcase.
If applicable, empty the top-
case and lift out the bottom
mat.
Push the slide latch 2 outward
and hold it in this position.
Turn the rotary fastener 3 in
the direction of the arrow RE-
LEASE.
Release warning 4 is visible.
Close topcase.