Operating Instructions
Table Of Contents
- Table of Contents
- General instructions
- Overviews
- Displays
- Operation
- Ignition switch/steering lock
- Ignition with Keyless Ride
- Emergency-off switch
- Lighting
- Dynamic Traction Control (DTC)
- Electronic chassis and suspension adjustment (D-ESA)
- Riding mode
- Cruise control
- Distance control (ACC)
- Hill Start Control
- Anti-theft alarm system (DWA)
- Tire pressure control (RDC)
- Heating
- Storage compartment
- Central locking system
- Cases
- TFT display
- Audio system
- Setting
- Riding
- Technology in detail
- Maintenance
- Accessories
- Care
- Technical data
- Service
- Appendix
- Index
206 MAINTENANCE
Lubricate the contact surface
on the spacer bushing 1
Lubricant
Optimoly TA
Insert the spacer bushing 1
into the wheel hub on the left
side with the seat facing out-
wards.
ATTENTION
Front wheel installation op-
posite the running direction
Accident hazard
Observe running direction
arrows on tire or rim.
Roll the front wheel into the
front suspension.
Lubricate the quick-release
axle 1.
Lubricant
Optimoly TA
WARNING
Improper installation of
quick-release axle
Loosening of the front wheel
After the brake caliper is
fastened and the spring
fork is relaxed, tighten the
quick-release axle and axle
clamping with the specified
torque.
Lift front wheel and install
quick-release axle 1.
Remove front wheel stand
and firmly compress front
forks. Do not actuate hand-
brake lever at the same time.
Attaching front-wheel stand
( 192).