Operating Instructions
Table Of Contents
- Table of Contents
- General instructions
- Overviews
- Displays
- Operation
- Ignition switch/steering lock
- Ignition with Keyless Ride
- Emergency-off switch
- Lighting
- Dynamic Traction Control (DTC)
- Electronic chassis and suspension adjustment (D-ESA)
- Riding mode
- Cruise control
- Distance control (ACC)
- Hill Start Control
- Anti-theft alarm system (DWA)
- Tire pressure control (RDC)
- Heating
- Storage compartment
- Central locking system
- Cases
- TFT display
- Audio system
- Setting
- Riding
- Technology in detail
- Maintenance
- Accessories
- Care
- Technical data
- Service
- Appendix
- Index
204 MAINTENANCE
ATTENTION
Using hard or sharp-edged
objects near the component
Component damage
Do not scratch components,
if necessary tape off or
cover.
Mask off areas of the wheel
rim that could be scratched in
the process of removing the
brake calipers.
ATTENTION
Unintentional pressing to-
gether of brake pads
Component damage when
mounting the brake caliper or
when pressing the brake pads
apart
Do not actuate the brakes
with the brake caliper re-
moved.
Carefully pull the brake
calipers back and outward
to remove them from brake
discs.
Make sure the ground is level
and firm and place the motor-
cycle on its center stand
Raise front of motorcycle un-
til the front wheel can turn
freely. Use a suitable front
wheel stand to raise the mo-
torcycle.
Attaching front-wheel stand
( 192).
Loosen the right axle clamp-
ing screw 1.
Remove the screw 1.
Loosen the left axle clamping
screw 2.
Slightly press the quick-re-
lease axle inward for a better
grip on the right side.