Operating Instructions
Table Of Contents
- Table of Contents
- General instructions
- Overviews
- Displays
- Operation
- Ignition switch/steering lock
- Ignition with Keyless Ride
- Emergency-off switch
- Lighting
- Dynamic Traction Control (DTC)
- Electronic chassis and suspension adjustment (D-ESA)
- Riding mode
- Cruise control
- Distance control (ACC)
- Hill Start Control
- Anti-theft alarm system (DWA)
- Tire pressure control (RDC)
- Heating
- Storage compartment
- Central locking system
- Cases
- TFT display
- Audio system
- Setting
- Riding
- Technology in detail
- Maintenance
- Accessories
- Care
- Technical data
- Service
- Appendix
- Index
199
If the brake fluid level falls be-
low the approved level:
Have the defect rectified as
quickly as possible by a spe-
cialist workshop, preferably an
authorized BMW Motorrad re-
tailer.
Installing suspension strut
cover ( 192).
CLUTCH
Check clutch function
Pull back the clutch lever.
Pressure point must be clearly
perceptible.
If no clear pressure point can
be felt:
Have the clutch checked by
an authorized workshop,
preferably an authorized
BMW Motorrad retailer.
COOLANT
Checking coolant level
Park the motorcycle, making
sure that the ground is firm
and level.
Allow the engine to cool
down.
Read the coolant level on the
expansion tank 1.
Required coolant level
Between MIN and MAX
marks on the expansion tank
(Engine cold)
If the coolant level drops below
the permitted level:
Topping up coolant ( 200).