Operating Instructions
Table Of Contents
- Table of Contents
- General instructions
- Overviews
- Displays
- Operation
- Ignition switch/steering lock
- Ignition with Keyless Ride
- Emergency-off switch
- Lighting
- Dynamic Traction Control (DTC)
- Electronic chassis and suspension adjustment (D-ESA)
- Riding mode
- Cruise control
- Distance control (ACC)
- Hill Start Control
- Anti-theft alarm system (DWA)
- Tire pressure control (RDC)
- Heating
- Storage compartment
- Central locking system
- Cases
- TFT display
- Audio system
- Setting
- Riding
- Technology in detail
- Maintenance
- Accessories
- Care
- Technical data
- Service
- Appendix
- Index
196 MAINTENANCE
Checking the rear brake pad
thickness
Park the motorcycle, making
sure that the ground is firm
and level.
Conduct a visual inspection
of the brake pad thickness.
Direction of view: from rear,
looking at brake pads 1.
Rear brake-pad wear
limit
0.04 in (1.0 mm) (Only fric-
tion material without carrier
plate.)
If wear limit is reached:
WARNING
Dropping below the mini-
mum pad thickness
Reduced braking action, dam-
age to the brake
In order to ensure the oper-
ating reliability of the brake
system, make sure that the
brake pads are not worn be-
yond their minimum thick-
ness.
Have brake pads renewed
at a specialist workshop,
preferably an authorized
BMW Motorrad retailer.