Operating Instructions
Table Of Contents
- Table of Contents
- General instructions
- Overviews
- Displays
- Operation
- Ignition switch/steering lock
- Ignition with Keyless Ride
- Emergency-off switch
- Lighting
- Dynamic Traction Control (DTC)
- Electronic chassis and suspension adjustment (D-ESA)
- Riding mode
- Cruise control
- Distance control (ACC)
- Hill Start Control
- Anti-theft alarm system (DWA)
- Tire pressure control (RDC)
- Heating
- Storage compartment
- Central locking system
- Cases
- TFT display
- Audio system
- Setting
- Riding
- Technology in detail
- Maintenance
- Accessories
- Care
- Technical data
- Service
- Appendix
- Index
194 MAINTENANCE
If the oil level is below the MIN
mark:
Topping up the engine oil
( 194).
If the oil level is above the MAX
mark:
Have the oil level corrected
at a specialist workshop,
preferably an authorized
BMW Motorrad retailer.
Topping up the engine oil
Park the motorcycle, making
sure that the ground is firm
and level.
Clean the area around the oil
filler opening.
Hold the oil cover tool 1
against the oil filler opening 2
and remove by turning
counterclockwise.
ATTENTION
Use of too little or too much
engine oil
Engine damage
Always make sure that the
oil level is correct.
Top up the engine oil to the
specified level.
Engine oil, quantity for
topping up
max 0.8 quarts (max 0.8 l)
(Difference between MIN and
MAX)
Checking engine oil level
( 193).
Install the cap 2 of the oil
filler opening.
BRAKE SYSTEM
Checking brake operation
Actuate the handbrake lever.
Pressure point must be clearly
perceptible.
Actuate the footbrake lever.
Pressure point must be clearly
perceptible.
If no clear pressure points are
perceptible: