Operating Instructions
Table Of Contents
- Table of Contents
- General instructions
- Overviews
- Displays
- Operation
- Ignition switch/steering lock
- Ignition with Keyless Ride
- Emergency-off switch
- Lighting
- Dynamic Traction Control (DTC)
- Electronic chassis and suspension adjustment (D-ESA)
- Riding mode
- Cruise control
- Distance control (ACC)
- Hill Start Control
- Anti-theft alarm system (DWA)
- Tire pressure control (RDC)
- Heating
- Storage compartment
- Central locking system
- Cases
- TFT display
- Audio system
- Setting
- Riding
- Technology in detail
- Maintenance
- Accessories
- Care
- Technical data
- Service
- Appendix
- Index
159
ATTENTION
Loading of the side stand
with additional weight
Component damage cause by
tipping over
Do not sit on the motorcy-
cle when it is parked on the
side stands.
Fold out side stand and park
motorcycle.
If the slope of the road per-
mits, turn the handlebars to
the left.
On slopes point the motor-
cycle uphill and engage 1st
gear.
Center stand
Switch off the engine.
ATTENTION
Poor ground conditions in
area of stand
Component damage cause by
tipping over
Always check that the
ground under the stand is
level and firm.
ATTENTION
Folding in the center stand
in case of strong movements
Component damage cause by
tipping over
Do not sit on the vehicle
while it is resting on the
center stand.
Fold down center stand and
prop up motorcycle.
On slopes point the motor-
cycle uphill and engage 1st
gear.
REFUELING
Fuel grade
Requirement
For optimal fuel consumption,
the fuel should be sulfur-free or
very low in sulfur content.
ATTENTION
Refueling with leaded fuel
Damage to catalytic converter
Do not refuel with leaded
gasoline or gasoline with
metallic additives, e.g. man-
ganese or iron.