Operating Instructions
Table Of Contents
- Table of Contents
- General instructions
- Overviews
- Displays
- Operation
- Ignition switch/steering lock
- Ignition with Keyless Ride
- Emergency-off switch
- Lighting
- Dynamic Traction Control (DTC)
- Electronic chassis and suspension adjustment (D-ESA)
- Riding mode
- Cruise control
- Distance control (ACC)
- Hill Start Control
- Anti-theft alarm system (DWA)
- Tire pressure control (RDC)
- Heating
- Storage compartment
- Central locking system
- Cases
- TFT display
- Audio system
- Setting
- Riding
- Technology in detail
- Maintenance
- Accessories
- Care
- Technical data
- Service
- Appendix
- Index
136 SETTING
MIRRORS
Adjusting mirrors
Move mirror into the desired
position by pressing lightly on
the edge of the glass.
HEADLIGHTS
Headlight range and spring
preload
Through the adaptation of the
spring preload, the headlight
range generally remains con-
stant.
Only with a very heavy payload
can adjustment of the spring
preload be insufficient. If that
is the case, the headlight range
must be adapted to the load.
If there are doubts as
to the correct headlight
range, have the adjustment
checked by a specialized work-
shop, preferably by an autho-
rized BMW Motorrad retailer.
Adjusting the headlight range
Requirement
If the spring preload adjust-
ment is no longer able to main-
tain the correct beam height to
avoid dazzling oncoming traffic
owing to high vehicle payloads:
Adjust the headlight range at
the adjustment screw 1.
WINDSHIELD
Adjusting the windshield
Switching on the ignition
( 58).
When riding off, the wind-
shield automatically moves to
its last position before the ig-
nition was turned off.