Operating instructions

9
5. Establishing the power supply
The power supply of the system is established via a 3-core cable. Con-
nect the black (clamp 31 – minus), the red (clamp 30 – steady plus) and
the blue cable (clamp 15 – ignition plus) to the power supply of your
radio (where required via the cigarette lighter or the fuse box).
Attention:
If you also connect the blue cable to clamp 30, the system X
will be permanently supplied with power. If the vehicle is not
running for a longer period, this could lead to a discharge
of the car battery.
6. Installation instructions for the fuses
Please cut through the red, the black and the blue cable by means of a
wire cutter or scissors. Now insert the two endings of the red cable
resulting from the cut into one of the binders, then close it. If you hear
two clicking noises, the clamp snapped in properly. Now insert one of
the fuses and then repeat the procedure with the other cables.