Operating instructions

The CL 1010 Time, which is fitted with a push switch and two LEDs only saves the tour data of the

vehicle if a business journey has been activated.

In order to carry out a read-out of the data, you must first remove the CL 1010 Time from the cradle.

Install the enclosed software on your PC. Now connect the CL 1010 Time with your PC using the USB

cable. You will find a USB jack on the side of the main unit of the CL 1010 Time. You can initialise a

brief description concerning the menu items of the software using the integrated help function.

Using the software, you are able to complete your tour data, change the system setting, enter a driver

ID or activate the system’s integrated warning function prior to danger zones.

If the CL 1010 Time is attached to a PC, the red LED will light up. As soon as the data are read out, the

green LED flashes. Subsequent to the conclusion of the read-out procedure, the green LED then lights

up on a constant basis. Please do not interrupt the connection of the CL 1010 Time with your PC duri-

ng the read-out procedure.

If you activated the danger zones warning function, then you are also able to set the volume level

adjuster of the integrated Piezo (acoustic sound emitter). If you press down and hold the push button

for approx. three seconds, then the signal gets louder on a second-by-second basis. Once the maxi-

mum volume is reached, the reproduction automatically starts at the lowest setting once again.

Please note:

The danger zones that are included are provided by X

the third party company Eifrig Media. You can download

updates to this data against payment at the internet site

www.scdb.info.

A warning sound is emitted every time you approach a X

danger zone.

Important:

Please ensure you pay attention to and comply with the X

road traffic laws and regulations which are in force in the

countries in which you want to use this software! You don’t

have to worry, however, if you use the system in the conditi-

on as it is supplied, as this function is not yet activated.