CL 1010 Time Index Introductory information 1. General 2. Security guidelines Installation of the system 3. 4. 5. 6. Scope of supply Positioning and mounting Establishing the power supply Installation instructions for the fuses Operating guidelines 7. Functions of the CL 1010 Time Further Information 8.
Introductory information 1. General Dear customer, Congratulation on purchasing a BURY product. You have chosen a high quality product that is extremely easy to use. All aspects of BURY production through to sales and service are subject to strict quality management according to DIN EN ISO 9001. All BURY products meet CE and e1 security standards. Furthermore, we provide a two-year warranty on all components. Please read the operating manual carefully so that you can fully enjoy your BURY product.
Position, volume Install the components of the device in the vehicle so that your field of vision is not impaired and the components are not mounted in the impact zone of the passenger compartment or in the airbag inflation zones. The removal of coverings (with and without airbags) or components of the dashboard requires – in some cases – special tools and special knowledge. Intended use We shall not be liable for damages or malfunctions due to improper use of the device.
Installation of the system 4 3.
Description of the components: 1) Connector box with power supply cable 2) CL 1010 Time and installation pad 3) Installation and Operating manual, software on DVD 4) Hook-and-loop fastener 5) Cleaning cloth 6) USB data cable 7) Fuses Please note: XXIf certain components are added or omitted you will receive the corresponding information on a separate enclosure. 4.
Installation of the system After having found a suitable position in the vehicle you can mount / attach the installation pad / hook-and-loop fastener accordingly. Please use a cleaning cloth for degreasing the surfaces you want to attach the installation pad to. The end of the cable with the small Molex plug is ideally suited for placing through small openings in the dashboard area. This facilitates a practically invisible installation of the cable.
To release the CL 1010 Time from the installation pad, please press in the two clips on each of the sides. The attachment is then released and you can remove the CL 1010 Time.
Installation of the system Step 2: Please lay the cables in a way that they do not lie/hang unsecured in the vehicle and that they may not influence the conducting of the vehicle. When laying a cable, please take care that it is not under traction stress but that it has some tolerance. Avoid crushing the cable as damages of the insulation can be caused by friction/rubbing. Step 3: Install the connector box at a convenient place in the vehicle. This can e.g.
5. Establishing the power supply The power supply of the system is established via a 3-core cable. Connect the black (clamp 31 – minus), the red (clamp 30 – steady plus) and the blue cable (clamp 15 – ignition plus) to the power supply of your radio (where required via the cigarette lighter or the fuse box). Attention: XXIf you also connect the blue cable to clamp 30, the system will be permanently supplied with power.
Operating guidelines 7. Functions of the CL 1010 Time The CL 1010 Time is a system which serves the purpose of displaying the vehicle positions with the use of GPS coordinates. Using road map data, these coordinates can then display a specific route along which the vehicle has travelled. This serves the purpose of setting an electronic log book which you can then subsequently edit or supplement with a special PC software programme. You can find this software on the DVD.
The CL 1010 Time, which is fitted with a push switch and two LEDs only saves the tour data of the vehicle if a business journey has been activated. In order to carry out a read-out of the data, you must first remove the CL 1010 Time from the cradle. Install the enclosed software on your PC. Now connect the CL 1010 Time with your PC using the USB cable. You will find a USB jack on the side of the main unit of the CL 1010 Time.
Further Information 8. Service In case of general or technical queries, suggestions and comments, please do not hesitate to contact our team at any time. Suggestions and feedback are always welcomed: BURY GmbH & Co. KG Robert-Koch-Straße 1-7 32584 Löhne Hotline: +49(0)180 5 - 842 468* Faxline: +49(0)180 5 - 842 329* * 0.14 €/min. Deutsche Telekom AG landline E-Mail: hotline@bury.com Service desk: In case of complaints, please return the product directly to our service desk: BURY GmbH & Co.
