BURY ChargingCradle Universal Installation manual
BURY ChargingCradle Universal Index Introductory information 1. General 2. Security guidelines Installation of the system 3. Scope of supply 4. Installation of the system 5. Installing the BURY ChargingCradle Universal in the vehicle 6. Inserting and removing the mobile phone 7. Rotating the cradle 8. Charging the phone in the cradle 9. Initialising the BURY ChargingCradle Universal Further information 10. Service 11. Appropriate use of this system 12.
Introductory information 2 1. General Dear customer, Congratulations on purchasing a BURY telephone holder for cellular phones. You have chosen a high quality product that is extremely easy to use. Please read the installation manual carefully so that you can fully enjoy your BURY product. If you have any further questions concerning installation or operation of this device, please contact your dealer. He will be happy to give you reliable advice. You can also contact our hotline.
3 Use while driving Operate the smartphone in the holder only when the situation allows it and when you do not endanger, harm, constrain, or annoy other road users. The volume of the smartphone has to be set in a way that exterior noise is still audible. Important: XXThe driver is ultimately responsible for the safe operation and control of their vehicle at all times.
Installation of the system 4 3.
5 The BURY ChargingCradle Universal is supplied with different combinations of components, depending on the sales regions (countries). The operating manual refers to all versions.
6 Installation of the system 4. Installation of the system Important: XXWhen positioning the cradle please take care that the device does not impair the view onto the road, that it will not be installed in the impact zone of the passenger compartment (amongst others in the airbag inflation zones) and that the cable may be laid without any problems. XXPlease avoid direct sunlight on the device or high internal temperatures, which can be rapidly reached in parked vehicles.
7 Step 2: Adapting the BURY ChargingCradle Universal to the size of the mobile phone. Important: XXBefore you begin to adjust the cradle to fit your particular mobile phone, it is important that you set the cradle to the closed position. This can be done by pushing the top of the cradle down until the locking button on the right side of the cradle, pops out with an audible “click”.
8 Installation of the system Insert the mobile phone into the cradle. Firstly, adjust the lower width of the cradle to the width of the mobile phone and press button 1 in order to block the set position. Next adjust the height and the upper width of the cradle to the height and width of the phone and press in keys 2 and 3 in order to block the set positions. Please note: XXIt is possible to set all positons of the cradle at the same time by lightly pressing button 1, 2 or 3.
9 Step 3: Adjusting the corner fastener. 4 3 1 2 Adjust the corner fastener to the thickness of the phone – increase the depth by turning it in a clockwise direction, tighten it by turning it anticlockwise. 5. Installing the BURY ChargingCradle Universal in the vehicle First of all, please choose the most convenient position for the BURY ChargingCradle Universal by checking different positions in the vehicle. The mounting of the Dash Mount Adapter may be different, depending on the vehicle.
10 Installation of the system Step 1: Attaching the Dash Mount Adapter. Variant A: Variant B: For the fixing of the Dash Mount Adapter, depending on the type and brand of your car, specific attachment systems (consoles or other assembly aids) can be purchased from local retailers.
11 Step 2: Connecting the BURY ChargingCradle Universal with the Dash Mount Adapter. Push the BURY ChargingCradle Universal in the Dash Mount Adapter until you can feel it click into place. Note: XXYou will find the same snap-in mechanism on the Window Mount as you do on the Dash Mount Adapter. Step 3: The preferred position for on-glass antenna is either on the upper right side or upper left side of the windshield, opposite from the driver´s seat.
12 Installation of the system 6. Inserting and removing the mobile phone Insert the smartphone in the BURY ChargingCradle Universal. Before you insert the smartphone in the cradle, release the holding mechanism by pressing the locking button in. The locking button is situated on the right hand side of the cradle. If necessary, remove the protective cover from your smartphone. Place the smartphone in the cradle from above.
13 Removing the smartphone from the BURY ChargingCradle Universal. To release the locking mechanism press the button on the right hand side of the cradle. Now remove the smartphone by lifting it out of the cradle.
14 Installation of the system 7. Rotating the cradle You can turn the smartphone by 180 degrees (90 degrees to the left or right accordingly) together with the cradle. Rotate your device to best suite the application you are using. Used in the landscape (horizontal) format, most smartphones will adjust the text size and websites images automatically making them easier to read. Using the cradle to the landscape format also gives more space for the onscreen keyboard making it easier to enter text data.
15 8. Charging the phone in the cradle If a corresponding cable is connected to the telephone, the smartphone that is positioned in the BURY ChargingCradle Universal cradle will be supplied with electrical power (please refer to the picture). The conduction of the electricity supply occurs from the electronic box or the charger. 9.
16 Further information 10. Service In case of general or technical queries, suggestions and comments, please do not hesitate to contact our team at any time. Suggestions and feedback are always welcomed: Administration: BURY GmbH & Co. KG Robert-Koch-Straße 1-7 D-32584 Löhne Germany Producer: BURY Spółka z o.o. ul. Wojska Polskiego 4 39-300 Mielec Poland Hotline: +49(0)180 5 - 842 468* Faxline: +49(0)180 5 - 842 329* * 0.14 €/min.
17 11. Appropriate use of this system The BURY ChargingCradle Universal is only intended for use in motor vehicles. When using this system, please comply with the regulations and laws specific to the country in which you are driving and the instructions provided in the guidebook for the mobile telephone that you are using. 12.
18 EXPRESS WARRANTY AGAINST DEFECTS – AUSTRALIA EFFECTIVE 1 st JANUARY, 2012 This product if imported by Point to Point Technology Pty Ltd is warranted in Australia to be free from any defect in material and workmanship, subject to the following terms and conditions. Who provides this warranty: POINT TO POINT TECHNOLOGY PTY LTD 2/2 KEYSBOROUGH CLOSE, KEYSBOROUGH VIC 3173 TOLL FREE: 1300 550 720 EMAIL: service@ptp.net.
