BLUETOOTH HANDS-FREE C ARCAR KIT KIT FREISPRECHEINRICHTUNG / HANDS-FREE CC 9060 GB Operating manual
CC 9060 Index Introductory information 1. General 2. Security guidelines Installation of the hands-free car kit 3. Scope of supply CC 9060 4. Positioning and mounting 5. Connecting the Electronic box 6. Installation instructions for the fuses 7. Installation instructions switching box AC 5120 Operating guidelines 8. Initial operation of the hands free set ® 9. Establishing a Bluetooth connection 10. Handling possibilities 11. The display 12a. Accepting, making, ending calls 12b. Transferring Calls 12c.
2 Introductory information 1. General Dear customer, Congratulation on purchasing a BURY hands-free car kit. You have chosen a high quality product that is extremely easy to use. All aspects of BURY production through to sales and service are subject to strict quality management according to DIN EN ISO 9001. All BURY hands-free car kits meet CE and e1 security standards. Furthermore, we provide a two-year warranty on all components.
Installation of the hands-free car kit 3. Scope of supply CC 9060 5 Description of the components: 1) Electronics box 2) Mounting pad 3) Display 4) Hook-and-loop fastener 5) Fixing screws for electronics box 6) Microphone with cable 7) Loudspeaker switching box AC 5120 4.
Installation of the hands-free car kit 6 Example of installation 1: 1 2 3 4 7 Step 2: Depending on the vehicle type and its equipment (e.g. airbags), it is reasonable to install the microphone either at the A-pillar, at the sun shield or at the roof interior. For details about the equipment features please refer to the vehicle documents. Please also observe the notes on distances to other components and to the driver / speaker, as specified in the installation manual.
8 Installation of the hands-free car kit 5. Connecting the Electronic box Please connect the switch box AC 5120 to the electricity supply of the radio and connect the Molex plug with the electronic box (see chapter: Connection of the loud speaker switch box AC 5120). 9 6. Installation instructions for the fuses If you install the CC 9060 without the switchbox AC 5120 please stick to the following instructions regarding the power supply safety.
10 Installation of the hands-free car kit 7. Installation instructions switching box AC 5120 11 After checking that all the cable lengths are sufficient, decide where you are able to attach the Audio switchbox. Now secure the Audio switchbox so that it isn’t able to flap about and/or rattle against other parts of your vehicle. Now connect the audio switchbox plug (1) to the hands-free car kit. (The other, smaller box is used by the audio switchbox plug for the microphone.
Installation of the hands-free car kit 12 The two ‘Phone-In’ cables are marked accordingly and must be plugged into the appropriate connections on the radio (blue, green or yellow). In this regard, please refer to the instructions concerning the connection configuration of your car radio in your car radio handbook. In lots of radios, the volume level (feedback of your conversation partner) can be controlled via the phone input and the selection of the loudspeaker.
14 Operating guidelines 8. Initial operation of the hands free set After power supply of the hands free Kit (HFK) is sucessful connected, the HFK is activated when you have started the vehicle. After that you have to select the user language. You can change the user language by selecting the entry lanuage. You will find the entry under more - head menue - settings - device- language (see chapter 22.5). 9.
16 Operating guidelines 12a. Accepting, making, ending calls In order to inform the driver of an incoming call, in the display a telephone symbol is shown. At the same time the name and telephone number of the caller (if available) will be shown. The audio system is switched to mute and the ring tone is broadcast through the loudspeaker of the audio system. You can accept or reject the call using either the voice control (which has to be activated beforehand, see chapter 22.5) or the touch screen.
18 Operating guidelines 12c. Conference Mode Introduction The hands-free car kit provides you with the possibility of merging up to seven conversations to create a conference. This means that all participants can talk to each other at the same time. If you receive a further call during an active telephone conversation, you can merge both conversations into a conference. To this end select the merge command (conference is shown in the display). 19 13.
20 Operating guidelines 14. Voice dial commands The HFK can be operated through the following voice commands. The voice commands are divided into different menus and some commands are only available in certain menus. With an active HFK, say `HELP´ if you are not sure which commands are available: the HFK will then name all possible commands. In addition to these commands, the HFK recognises the numbers from zero to nine. Numbers which are larger than nine must be spoken individually (e.g. 10 = one, zero).
Operating guidelines 22 17. Phonebook Phonebook Press and release the button for the voice control shortly and use the voice command `PHONEBOOK´. Since your phonebook is scanned with the first coupling of your mobile phone with the system, it is immediately available to you and is stored until you delete the mobile phone from the list (see chapter: Bluetooth®). The telephone book data can of course only be seen or changed by you.
Operating guidelines 24 18. Redial Redial The number which was last selected can be selected once again 19. Call list Dialled calls Missed calls Here in a chronologic sequence all calls are listed which have been made, missed or accepted. You can have the telephone number read to you and if you want call back. The navigation within the lists is carried out analogue to that of the phonebook. Received calls 25 22. Settings In this menu point, you can configure the HFK through five further submenus.
Operating guidelines 26 Speaker adaptation Description The HFK works in general independent from the speaker, that means it can immediately be operated without a `Voice training´. Then user training is only needed if you speak a strong dialect. The HFK reads twenty terms aloud to you which you have to repeat so that the system can “get used to” your voice. Here you will receive short instructions about the essential functions of the HFK. 22.
Operating guidelines 28 Device 22.5 Device Further Information 24. Service In case of general or technical queries, suggestions and comments, please do not hesitate to contact our team at any time: Call answering on Language Sync Phonebook System Version Info Software Update Factory setting In this sub menue you can choose, if incoming calls should be accepted automatically, manually or via voice.
