CC 9048 Installation and operating manual
CC 9048 Index Introductory information 1. General 2. Security guidelines Installation of the hands-free car kit 3. Scope of supply 4. Positioning and installation 5. Connections at electronic box Operating guidelines 6. Language selection 7. Establishing a Bluetooth connection 8. Illuminated remote control 9. Playing music 10. VoiceTag feature Further Information 11. Service 12. Appropriate use of this system 13.
Introductory information 2 1. General Dear customer, Congratulations on purchasing a BURY hands-free car kit. You have chosen a high quality product that is extremely easy to use. Please read the operating manual carefully so that you can fully enjoy your BURY hands-free car kit. If you have any further questions concerning installation or operation of your car kit, please contact your dealer. He will be happy to give you reliable advice. You can also contact our hotline.
3 Intended use We shall not be liable for damages or malfunctions due to improper use of the navigation system. Therefore, do not expose the device to moisture, extreme temperatures or shocks and carefully follow the procedure described in the installation and operating guidelines. Use while driving Operate the system only when the situation allows it and when you do not endanger, harm, constrain, or annoy other road users.
4 Installation of the hands-free car kit 3.
5 The hands-free car kit (HFCK) is supplied with different combinations of components, depending on the sales regions (countries). The operating manual refers to all versions.
6 Installation of the hands-free car kit 4. Positioning and installation Step 1: First of all, choose the most suitable location for the illuminated remote control by positioning it or holding it at different locations in the vehicle yourself. Once you have found a suitable position for the illuminated remote control, you can attach it / mount it appropriately. Please use the cleaning cloth provided to remove any grease or dirt from the surfaces.
7 5. Connections at electronic box The other components of the hands-free car kit are connected to the electronic box.
8 Installation of the hands-free car kit Toggling between the installation options 1, 2 and 4 is done with the buttons “+” and “-”. In order to toggle the installation options, you must keep these buttons pressed simultaneously for 4 seconds. Option 1 is the standard setting upon delivery of the hands-free car kit. Music and voice are output via the loudspeakers using the ISO jacks. The amplifiers of the hands-free car kit are used for playback. Mobile audio is active in the device.
9 If you want music or voice signals to be fed via the four LINE cables, you must adjust them accordingly to the respective type of radio and its connections (PHONE-IN or AUX-IN). Appropriate adapters are available from specialists shops. Step 2: The hands-free car kit supports the radio mute function, if this function is also supported by the radio. The mute signal is then fed to the radio via the yellow cable of the ISO cable harness.
Installation of the hands-free car kit 10 Connection diagram for ISO cable harness - 12V Power 12/24V Ignition Ground Line-out 1 1-Line L + / Phone L + 2-Line L - / Phone L - - Line-out 2 1-Line R + / Phone R + 2-Line R - / Phone R - - Micro Molex 24 - ISO - connection to the electronic box (HFCK) - connection to the vehicle’s speakers - connection to the vehicle’s power supply - connection to the car radio - connection to the car radio 1 - C RR2 - C RF3 - C LF4 - C LR5 - R LR6 - R LF7 - R RF8 - R
11 3 - MICROPHONE This is where you plug in the microphone jack. This ensures that neither of the jacks is able to loosen as a result of vibrations. 4 - LINE-IN To connect external music players. 5 - DISPLAY Multifunction display for possible system expansions (not for CC 9048). 6 - RJ45 - Input for the illuminated remote control. Please connect the illuminated remote control plug to this socket.
12 Operating guidelines 6. Language selection After properly connecting the HFCK to the power supply, the device will start with the launch of the car ignition. To use voice prompts, activate them by pressing and holding the Plus button for 10 seconds. Then select the language for voice prompts after the device informs about it by emitting “select language”.
13 Note: XXIf the rechargeable battery of the mobile phone is low, it is sometimes not possible to establish a Bluetooth connection. The HFCK has a memory for the storage of the identification of up to 8 mobile phones. In case a ninth mobile phone is connected, the oldest entry in the HFCK memory will be cancelled. If you wish to cancel a Bluetooth connection, you can either disconnect it conveniently at the HFCK or at your mobile phone.
Volume up Volume up * depending on mobile phone Active call Incoming call When HFCK is connected with phones and call is active (Multipoint) Volume up - Incoming call After factory reset Language selection Volume up When HFCK is connected Volume up with phone (or two phones) When HFCK is not connected with phone Stand-by End first call and make incoming call active on device Quit call Volume down Accept call Calls phone voice tags Choose current language Auto connect on/off Volume down
15 9. Playing music There are two ways of playing music in case of the CC 9048 hands-free car kit. Through A2DP (Bluetooth) After the phone is connected to the hands-free car kit via Bluetooth, music can be played through A2DP. Music player in the phone has to be turned on. Handling music playback is done with the phone (play, stop, pause, forward, backward). Volume adjustment can be controlled with the hands-free car kit.
16 Operating guidelines 10. VoiceTag feature VoiceTag feature enables the voice control of the phone. The device (CC 9048) has a button activating it on the phone (middle one). Activation is done by briefly pressing the button. When it’s activated: Making calls Press the call button. The device says: Enter voicetag. Give your voicetag loud and clearly.
17 Tip: XXYou can only stop the music play back via your smartphone. XXIn the event of incoming and outgoing calls, the music play back will be automatically interrupted. XXEnsure that your mobile only transfers music files to the hands-free car kit via A2DP. Optimum playback quality can only be guaranteed if this is the case. If you press the call button on the CC 9048, the device says: Enter voicetag. Some smartphones may then release a signal sound after one to three seconds.
18 Further Information 11. Service In case of general or technical queries, suggestions and comments, please do not hesitate to contact our team at any time. Suggestions and feedback are always welcomed: Administration: BURY GmbH & Co. KG Robert-Koch-Straße 1-7 D-32584 Löhne GERMANY Producer: BURY Spółka z o.o. ul. Wojska Polskiego 4 39-300 MIELEC POLAND Hotline: +49(0)180 5 - 842 468* Faxline: +49(0)180 5 - 842 329* * 0.14 €/min.
19 12. Appropriate use of this system This hands-free car kit is only intended for use with Bluetooth mobile telephones in motor vehicles. When using this system, please comply with the regulations and laws specific to the country in which you are driving and the instructions provided in the guidebook for the mobile telephone that you are using. 13.
20 EXPRESS WARRANTY AGAINST DEFECTS – AUSTRALIA: This product if imported by Point to Point Distributions Pty Ltd is warranted in Australia to be free from any defect in material and workmanship, subject to the following terms and conditions. Who provides this warranty: Point to Point Distributions Pty Ltd Unit 9, 7-8 Len Thomas Place Narre Warren Vic, 3805. Tel: +61 3 8794 1800 Email: service@ptpdist.net.
