CC 9045 Index Introductory information 1. General 2. Security guidelines 22 22 Installation of the hands-free car kit 3. Scope of supply 4. Positioning of the 3-button remote control 5. Connecting the Electronic box 6. Installation of the audio switchbox AC 5120 7. Installation instructions for the fuses Operating guidelines ® 12. Service 24 24 26 27 30 34 35 8. Switch-on 9. Establishing a Bluetooth connection 10. 3-Button Remote Control 11.
2 Introductory information 1. General Dear customer, Congratulation on purchasing a BURY hands-free car kit. You have chosen a high quality product that is extremely easy to use. All aspects of BURY production through to sales and service are subject to strict quality management according to DIN EN ISO 9001. All BURY hands-free car kits meet CE and e1 security standards. Furthermore, we provide a two-year warranty on all components.
23 Position, volume Install the components of the device in the vehicle so that your field of vision is not impaired and the components are not mounted in the impact zone of the passenger compartment or in the airbag inflation zones. The removal of coverings (with and without airbags) or components of the dashboard requires – in some cases – special tools and special knowledge. Intended use We shall not be liable for damages or malfunctions due to improper use of the navigation system.
24 3.
25 Description of the components: 1) Electronics box (with or without an internal switch box, depending on version) 2) Remote control 3) Microphone 4) Installation and Operating manual 5) Fixing screws for electronics box, rider Variant 1: 6) External loudspeaker switch-box AC 5120 Variant 2: 6) Power supply cable with fuses 7) Cable for internal loudspeaker switch box Please note: XXIf certain components are added or omitted you will receive the corresponding information on a separate enclosure.
26 Installation of the hands-free car kit 4. Positioning of the 3-button remote control Step 1: First of all, choose the most suitable location for the 3-button remote control by positioning it or holding it at different locations in the vehicle yourself. Once you have found a suitable position for the remote control, you can attach it / mount it appropriately. Please use the cleaning cloth provided to remove any grease or dirt from the surfaces.
27 difficulty. Before connecting the components to the electronics box you should branch off the battery for safety reasons. In doing so, take into account that there might be a radio coding (confer radio manual). Important: XXPlease install the electronics box behind a cover or somewhere you can only reach by opening or unfastening a protective cover / a cover. The terminal box must not hang loosely in the vehicle. 5.
28 Installation of the hands-free car kit Version 2, with external loudspeaker switch box: Refer to the separate chapter: Installation of the audio switch box AC 5120 2 - System 9 Socket Socket for connection of the basePlate suitable for the CC 9045 from the System 9. 3 - Voice output of the hands-free car kit Version 1, with integrated loudspeaker switch box: The cable provided serves the purpose of transferring the voice output to one of the loudspeakers in the car.
29 5 - Speaker output Please connect the 3.5 mm jack plug of the external BURY loudspeaker (available as an accessory) to this socket. 6 - AUX-Out connection Stereo music is output at connection 2. Here you can connect the AUXIn input of your radio (if existent) via adapters available at local retailers. For the connection to the hands-free car kit, the adapter must have a 3.5 mm stereo jack. Depending on the car radio, the other end must be selected otherwise.
30 Installation of the hands-free car kit 6. Installation instructions switching box AC 5120 With the AC 5120 speaker switchbox, you get the possibility of being able to mute the feedback of your car radio / CD player etc. and to transfer the voice output of your conversation partner during a telephone call to your vehicle’s speakers. This means that the installation of additional speakers isn‘t required. If your radio has a mute function, then the vehicle speakers are turned onto mute using the radio.
31 After checking that all the cable lengths are sufficient, decide where you are able to attach the Audio switchbox. Now secure the Audio switchbox so that it isn’t able to flap about and/or rattle against other parts of your vehicle. Now connect the audio switchbox plug (1) to the hands-free car kit. (The other, smaller box is used by the audio switchbox plug for the microphone.) Now connect the white power out cable connector (2) of your Audio switchbox to the power supply socket of your hands-free kit.
Installation of the hands-free car kit 32 The two ‘Phone-In’ cables are marked accordingly and must be plugged into the appropriate connections on the radio (blue, green or yellow). In this regard, please refer to the instructions concerning the connection configuration of your car radio in your car radio handbook. In lots of radios, the volume level (feedback of your conversation partner) can be controlled via the phone input and the selection of the loudspeaker.
33 Configuration II If the configuration of pin 7 of the ISO plug is connected to the ignition and pin 4 is connected to the power supply, you should check to see whether the connection looks like the illustration below. Switchbox Switchbox red 7 (red) blue 4 (blue) red 7 (red) blue 4 (blue) Vehicle Vehicle In the operating manual of the radio device, you can find the pin assignment for the “mute” signal. This signal can occur on one of three cables marked with “mute1”, “mute2”, or “mute3”.
34 Installation of the hands-free car kit 7. Installation instructions for the fuses If you install the CC 9045 without the AC 5120 switch box then the power supply must be secured with a fuse in the way described below. Please cut through the red, the black and the blue cable by means of a wire cutter or scissors. Now insert the two endings of the red cable resulting from the cut into one of the binders, then close it. If you hear two clicking noises, the clamp snapped in properly.
Operating guidelines 35 8. Switch-on When providing the hands-free car-kit (HFCK) with power, a long signal is audible. The HFCK tries to establish a connection for 90 seconds (depending on the number of connected telephones) to the last connected mobile telephone within reach. 9. Establishing a Bluetooth connection ® If you wish to establish a Bluetooth connection for the first time, you have to activate the Bluetooth function of your mobile phone and search for Bluetooth devices.
36 Operating guidelines The Bluetooth connection is automatically re-established only if you re-enter the reception area of the HFCK (approx. 10 metres) and if you want to perform or receive a phone call. Exceptions hereto are some mobile telephones which only re-establish the Bluetooth connection after the confirmation of a message. It is only possible to establish one Bluetooth connection with a mobile telephone even if several mobile telephones which can be identified by the HFCK may be nearby.
9ROXPH XS 9ROXPH XS 9ROXPH XS :KHQ +)&. LV FRQQHFWLQJ ZLWK SKRQH :KHQ +)&. LV FRQQHFWHG ZLWK SKRQH QR FDOO :KHQ +)&. LV FRQQHFWHG ZLWK SKRQH DQG LQFRPLQJ FDOO LV SUHVHQW :KHQ +)&. LV FRQQHFWHG ZLWK SKRQH DQG FDOO LV DFWLYH 3DLULQJ &RQQHFWHG 5LQJ $FWLYH FDOO '63 WR ILOWHU RXW HFKRHV DQG EDFNJURXQG QRLVH :KHQ +)&.
Volume down * DSP = to filter out echoes and background noise HFP = Hands-free Profile A2DP = Advanced Audio Distribution Profile Active call Volume up Connected Volume down Volume down Volume down Volume up Phone is connected to device with HFP and with A2DP, no call Pairing Volume down Change car kit mode to private mode or private mode to car kit mode Rejects call Disconnect HFCK and phone (both profile: HFP and A2DP) - ** depending on mobile phone Quit call Accept call Calls phone voi
39 11. Play music with A2DP If your mobile telephone possesses the Bluetooth profile A2DP, you can play music (e.g. MP3 files) in stereo quality via the HFCK. It is important to play the music title selected respectively on the HFCK via the function ‚play via...‘. ® As the menu navigation of the manufacturers of mobile telephones differs considerably, the designation of the selection ‚...Bluetooth stereo-headset‘ may vary.
40 Further Information 12. Service In case of general or technical queries, suggestions and comments, please do not hesitate to contact our team at any time. Suggestions and feedback are always welcomed: BURY GmbH & Co. KG Robert-Koch-Straße 1-7 32584 Löhne Hotline: +49(0)180 5 - 842 468* Faxline: +49(0)180 5 - 842 329* * 0.14 €/min. Deutsche Telekom AG landline E-Mail: hotline@bury.com Service desk: In case of complaints, please return the product directly to our service desk: BURY GmbH & Co.
