Instruction manual

Appliances 9
Touring - 03/11-1 - englisch (EN) - 0731070 - HYW-0102-01EN 97
9.6.2 Operating Modes
The refrigerator has 2 operating modes:
- Gas operation
- Electric operation (240 V AC or 12 V DC)
The operating mode is set on the refrigerator panel. Infinitely variable regulation of the cooling power
is only possible with gas operation and when the refrigerator is operated with 240 V. It is not possible
with 12 V operation.
Gas operation
Turning on:
Set 240 V switch (Fig. 81,2) to "0".
Set 12 V switch (Fig. 81,1) to "0".
Open the regulator tap on the gas bottle and the gas isolator tap "Refrigerator".
Set the control knob (Fig. 81,4) to "Large flame“, press and hold in. Wait until gas gets into the
burner.
Press the gas ignition button (Fig. 81,5) twice quickly.
Hold the control knob down for approx. 15 seconds after ignition until the thermocouple keeps
the gas supply automatically open.
The bluish flame can be observed in a viewing glass inside the refrigerator at the bottom left.
If the flame does not burn, repeat ignition.
After the refrigerator has been in operation in
"Max." position for 24 hours the gas supply can
be reduced if the cooling power is sufficient.
Turning off:
Set control knob to P "OFF".
Close the gas isolator tap "Refrigerator" and
the regulator tap on the gas bottle.
Fig. 81 Operating controls for refrigerator
> Select only one energy source.
Never let gas escape unburned due to danger of explosion.