Instruction manual

6 Living
64 Touring - 03/11-1 - englisch (EN) - 0731070 - HYW-0102-01EN
6.8.6 Seating Group
Puck L 225 GT
Slightly lift the front of the table-top
(Fig. 49,3).
Press the top of the table leg (Fig. 49,6) to-
gether and fold it against the bottom of the
table.
Lift the table-top by approx. 45°, remove it
out of the mounting rail (Fig. 49,4) and lay it
aside. The table is not required for the
sleeping conversion.
Remove the bed rods (Fig. 50,7) from the
bedding box (Fig. 50,5).
Lift up both seat cushions (Fig. 50,2) and
place the two bed rods (Fig. 50,7) in a trans-
verse position in the pertinent grooves be-
tween both bedding boxes.
Pull the seat cushions into the centre.
Fig. 49 Prior to conversion
Fig. 50 During conversion
Insert the back cushions (Fig. 51,1) be-
tween the seat cushions (Fig. 51,2) and the
exterior wall.
Fig. 51 After conversion
1 Back cushion
2Seat cushion
3 Table-top
4 Mounting rail
5 Bedding box
6 Table leg
7Bed rod