Instruction manual
Living 6
Touring - 03/11-1 - englisch (EN) - 0731070 - HYW-0102-01EN 63
6.8.5 Seating Group Puck 120
Slightly lift the front of the table-top
(Fig. 46,3).
Remove table leg (Fig. 46,6).
Lift the table-top by approx. 45°, remove it
out of the mounting rail (Fig. 46,4) and lay it
aside. The table is not required for the
sleeping conversion.
Fig. 46 Prior to conversion
Remove the bed rods (Fig. 47,7) from the
bedding box (Fig. 47,5).
Lift up both seat cushions (Fig. 47,2) and
place the two bed rods (Fig. 47,7) in a trans-
verse position in the pertinent grooves be-
tween both bedding boxes.
Pull the seat cushions into the centre.
Fig. 47 During conversion
Insert the back cushions (Fig. 48,1) be-
tween the seat cushions (Fig. 48,2) and the
exterior wall.
Fig. 48 After conversion
1 Back cushion
2 Seat cushion
3Table-top
4 Mounting rail
5 Bedding box
6 Table leg
7Bed rod