Instruction manual

6 Living
62 Touring - 03/11-1 - englisch (EN) - 0731070 - HYW-0102-01EN
6.8.4 Seating Group with Bed
1400 x 1900
Slightly lift the front of the table-top
(Fig. 43,3).
Press the top of the table leg (Fig. 43,6) to-
gether and fold it against the bottom of the
table.
Lift the table-top by approx. 45°, remove it
out of the mounting rail (Fig. 43,4) and place
to the side. The table is not required for the
sleeping conversion.
Release bed leg (Fig. 44,7) and turn it a
quarter turn.
Ensure that the bed leg is correctly placed
on the bedding box (Fig. 44,5) opposite.
Lightly lift up the two seat cushions
(Fig. 44,2) and pull them to the middle.
Fig. 43 Prior to conversion
Fig. 44 During conversion
Insert the back cushions (Fig. 45,1) be-
tween the seat cushions (Fig. 45,2) and the
exterior wall.
Push the table-top (Fig. 45,3) under the
bed.
Fig. 45 After conversion
1 Back cushion
2Seat cushion
3 Table-top
4 Mounting rail
5 Bedding box
6 Table leg
7Bed leg
HYW00711
12231
5
7
4
3
1
2
2
1
5
6
HYW00771
22
5
2
2
5
73
HYW00641
1221
5
3
1 2
2
5
1
7