Instruction manual

Living 6
Touring - 03/11-1 - englisch (EN) - 0731070 - HYW-0102-01EN 61
6.8.3 Seating Group with two Sin-
gle Beds
Slightly lift the front of the table-top
(Fig. 40,3).
Press the top of the table leg together and
fold it against the bottom of the table.
Lift the table-top (Fig. 40,3) by approx. 45°,
remove it out of the mounting rail (Fig. 40,4)
and place to the side. The table is not re-
quired for the sleeping conversion.
Fig. 40 Prior to conversion
Pull out slatted frame (Fig. 41,7).
Remove the back cushion (Fig. 41,1) and
lay it aside.
Remove the back cushion (Fig. 41,5) from
the back cushion (Fig. 41,6).
Lightly lift up the two seat cushions
(Fig. 41,2) and pull them on the slatted
frame (Fig. 41,7).
Fig. 41 During conversion
Insert the back cushions (Fig. 42,5 and 6)
between the seat cushions (Fig. 42,2) and
the exterior wall.
Fig. 42 After conversion
1 Back cushion
2 Seat cushion
3Table-top
4 Mounting rail
5 Back cushion
6 Back cushion
7 Slatted frame
HYW06697
522
3
1
4
31 2 2
5
6
77
HYW06698
22
2
2
1
5
77
56
1 7 7
HYW06699
22
2
2
5 6
6
77
5