Instruction manual

6 Living
60 Touring - 03/11-1 - englisch (EN) - 0731070 - HYW-0102-01EN
6.8.2 Side Seating Group
Troll 552 GT/Front Seating
Group Troll 550/555 GT
Slightly lift the front of the table-top
(Fig. 37,3).
Release the locking device fitted to the table
leg and fold the lower half of the table leg
backwards by 90°.
Lift the table-top by approx. 45°, remove it
out of the mounting rail and place to the
side.
Lay the two seat cushions in position
(Fig. 37,2 and 4).
Place table-top into the lower holders.
Pull out the bedding box extension
(Fig. 38,6).
Fig. 37 Prior to conversion
Fig. 38 During conversion
Place both seat cushions (Fig. 39,2 and 4)
in the centre.
Insert the back cushions (Fig. 39,1 and 5)
between the seat cushions and the wall.
Lay the additional cushions (Fig. 39,8
and 9) on the bedding box extension.
Fig. 39 After conversion
1 Back cushion
2Seat cushion
3 Table-top
4Seat cushion
5 Back cushion
6 Bedding box extension
7 Bedding box
8 Additional cushion, short
9 Additional cushion, long
1
5
4
32
77
6
6
HYW06805
5
3 1
2
4
73
7
6
6
3
77
HYW06806
4
5 2 1
5 1
4
2