Instruction manual

6 Living
58 Touring - 03/11-1 - englisch (EN) - 0731070 - HYW-0102-01EN
6.8 Sleeping Conversion
6.8.1 Front Seating Group
Place the seat cushions (Fig. 32,2) in an up-
right position.
Slightly lift the front of the table-top
(Fig. 32,3).
Release the locking device fitted to the table
leg and fold the lower half of the table leg
backwards by 90°.
Lift the table-top (Fig. 32,3) by approx. 45°,
remove it out of the upper mounting rail
(Fig. 32,4) and hold it at an angle of 45°.
Insert the table-top (Fig. 33,3) in the lower
mounting rail (Fig. 33,7) and place it on the
floor with the folded table leg (Fig. 33,6).
Fold out flap of the bed extension
(Fig. 33,8).
Fig. 32 Prior to conversion
Fig. 33 During conversion (not for Troll 530)
Fig. 34 During conversion (Troll 530)
1 Back cushion
2Seat cushion
3 Table-top
4 Upper mounting rail
5 Bedding bed
6 Table leg
7 Lower mounting rail
8 Flap bed extension
9 Additional cushion
HYW02561
4
8
4
3
7
6
8
5
3
1
1
2
1
2
2
HYW02571
7
8
4
7
6
8
3
5
3
1
2 2
1
1
2