Instruction manual

Living 6
Touring - 03/11-1 - englisch (EN) - 0731070 - HYW-0102-01EN 57
6.7.3 Fixed Bed (Variant 1)
A storage compartment is underneath the bed.
Lift up the slatted frame to place items in the
storage compartment or to empty it.
Opening:
Lift the mattress forwards and set it down on
the panel.
Lift slatted frame.
The gas-pressure springs (Fig. 30,1) hold
the slatted frame open.
Closing:
Press the slatted frame downwards against
the resistance of the gas-pressure spring.
If necessary, push the mattress behind the
panel.
Fig. 30 Fixed bed (variant 1)
6.7.4 Fixed Bed (Variant 2)
A storage compartment is underneath the bed.
Lift up the slatted frame to place items in the
storage compartment or to empty it from the in-
side.
Opening:
Lift the mattress forwards and set it down on
the panel.
Lift the slatted frame to the desired height
and allow both hinges (Fig. 31,1) to engage
in the same position.
Closing:
Lift the slatted frame as far as possible. The
hinges release (Fig. 31,1) in a downwards
direction.
Guide slatted frame all the way down.
If necessary, push the mattress behind the
panel.
Fig. 31 Fixed bed (variant 2)
Do not let the slatted frame fall
down when closing the bed.