Instruction manual

6 Living
54 Touring - 03/11-1 - englisch (EN) - 0731070 - HYW-0102-01EN
6.5.2 Folding Table Single Bed Seating Group Troll (Variant 1)
Putting up folding table:
Undo the snap fasteners of the securing
straps (Fig. 25,2).
Open retaining belt (Fig. 25,1).
Carefully remove the folding table
(Fig. 25,3) from the holder.
Place the folding table with the legs up-
wards onto the seat cushions.
Fold the legs (Fig. 26,5) one after the other
outwards against the resistance of the
springs (Fig. 26,4) until the retaining clips
(Fig. 26,1) engage in the hooks (Fig. 26,2)
of the guides (Fig. 26,3).
Turn round the folding table and place it be-
tween the single beds.
Removing folding table:
Turn the folding table round and place it with
the legs upwards onto the seat cushions.
Press the retaining clips (Fig. 26,1) on both
legs one after the other from the hook
(Fig. 26,2) of the guide (Fig. 26,3) and fully
retract the leg (Fig. 26,5).
The retaining clip is kept in the closed posi-
tion by the spring (Fig. 26,4).
Push the folding table with the legs back-
wards in the holder between seating group
and cabinet (Fig. 25).
Secure the folding table (Fig. 25,3) with the
retaining belt (Fig. 25,1) and the securing
straps (Fig. 25,2).
Fig. 25 Folding table in the holder
Fig. 26 Folding table, folding mechanism
> Before commencing the journey, always retract the folding table and secure it in the
holder provided for this purpose.