Instruction manual

Living 6
Touring - 03/11-1 - englisch (EN) - 0731070 - HYW-0102-01EN 49
Opening hinged window with clamp fitting:
Place window handle (Fig. 18,3) into a verti-
cal position.
Open the hinged window until the required
position has been reached and use knurled
knob (Fig. 19,1) to secure in position.
Closing hinged window with clamp fitting:
Turn knurled knob (Fig. 19,1) until the latch
is released.
Close the hinged window.
Place the window handle (Fig. 18,3) into a
horizontal position. The locking catch
(Fig. 18,2) is located on the inside of the
window catch (Fig. 18,1).
Opening hinged window with automatic
locking mechanism:
Undo safety screw at the hinges of the side
and rear windows (depending on model).
Swing out safety screw out of the retaining
clip.
Open the window until the required locking
position is reached; the telescopic rod
(Fig. 20) automatically locks in place.
The hinged window remains locked in the re-
quired position.
Closing hinged window with automatic lock-
ing mechanism:
Open the hinged window as wide as neces-
sary until the lock releases.
Close the hinged window.
Place the window handle (Fig. 18,3) into a
horizontal position. The locking catch
(Fig. 18,2) is located on the inside of the
window catch (Fig. 18,1).
Hook safety screw at the telescopic rods
into retaining clips of the side windows and
the rear window and tighten it.
Fig. 18 Hinged window, window handle
closed
Fig. 19 Hinged window, clamp fitting
Fig. 20 Hinged window, automatic locking
mechanism