Instruction manual

3 Before the Journey

28 Touring - 03/11-1 - englisch (EN) - 0731070 - HYW-0102-01EN

3.3.2 AL-KO AKS 1300

Pull up the stabilising lever (Fig. 2,1) as far

as possible.

Turn the handwheel (Fig. 2,2) in an anti-

clockwise direction as far as possible in the

open position.

Pull the coupling handle (Fig. 2,3) upwards.

Place the opened stabiliser on the caravan

ball. The coupling handle must audibly lock

back into its previous position.

In addition, push the coupling handle down-

wards with your hand. Closing and securing

is carried out automatically.

Fig. 2 AL-KO AKS 1300 stabiliser

Conduct a visual inspection: the green point on the safety indicator (Fig. 2,4) must be visible.

Turn handwheel in a clockwise direction until it can be felt and heard that the torque limiting

mechanism grates.

Push the stabilising lever down until the marking on the stabilising lever is aligned with that on

the stabilising housing (Fig. 2,5).

3.4 Detaching

Apply the caravan handbrake.

Place the wheel chocks behind both of the wheels.

Remove the plug from the towing vehicle socket and insert it in the retainer which is to be found

on the drawbar.

Remove the brakeaway cable from the towing vehicle.

Lower the jockey wheel until it is firmly positioned on the ground. Now loosen the coupling.

Using the jockey wheel, lift the drawbar until the towing vehicle can be driven away without risk.

HYW02730

There is a risk of accidents and injury when connecting a caravan. Therefore, exer-

cise care when detaching the caravan from the towing vehicle.

Observe the additional safety instructions with respect to connecting included in this

instruction manual.