Instruction manual

Customer Service and Maintenance 12
Touring - 03/11-1 - englisch (EN) - 0731070 - HYW-0102-01EN 119
12.3 Replacing Bulbs and Fluorescent Tubes, Internal
12.3.1 Spotlight (Variant 1)
Opening:
Turn the the glass (Fig. 93,1) in a clockwise
direction.
Remove the glass.
Change the halogen bulb.
Fig. 93 Spotlight (variant 1)
12.3.2 Spotlight (Variant 2)
Opening:
Grip the edge of the spotlight glass
(Fig. 94,1) and pull forward.
Change the halogen bulb.
Fig. 94 Spotlight (variant 2)
Bulbs and light fittings can be extremely hot. Therefore, allow lights to cool down be-
fore changing bulbs.
Store bulbs in a safe place inaccessible to children.
Do not use any bulb that has been dropped or which shows scratches in its glass. It
may burst.
Lights can get very hot. Always maintain a safety distance of 30 cm. Fire hazard!
> Halogen bulbs should not be touched with the fingers. Use a cloth when installing new
halogen bulbs.
> Only use bulbs of the same type and with the correct wattage.