Instruction manual
12 Customer Service and Maintenance
118 Touring - 03/11-1 - englisch (EN) - 0731070 - HYW-0102-01EN
12.2 AKS 1300 Stabiliser
Clean the stabiliser and the coupling head regularly. Use either thinners or white spirit. When lubri-
cating the stabiliser ensure that no lubricant is on the friction pads.
Checking the stabilising device (on the side
of the friction pads):
Prerequisite:
Connection to AKS 1300, ball diameter 50 mm
Turn the hand wheel (Fig. 91,1), until it can
be heard and felt that the torque limiting
mechanism grates. Turn in a in a clockwise
direction.
Check distance a:
- Distance a > 0 (Fig. 91):
Wear within the permissible range.
- Distance a = 0 (Fig. 92):
Check and, if necessary, replace the fric-
tion pads.
Fig. 91 Friction control
Fig. 92 Friction control
> Resetting the friction pads is not
required.