Instruction manual

Customer Service and Maintenance 12
Touring - 03/11-1 - englisch (EN) - 0731070 - HYW-0102-01EN 117
12 Custom er Service an d Maintenance
Chapter Overview
This chapter contains instructions regarding the maintenance of the caravan.
The instructions address the following topics:
stabiliser
replacing light bulbs
adjusting the tension of the spring on the insect screen
spare parts
At the end of the chapter you will find the ERIBA (HYMER) service numbers and important instruc-
tions on how to obtain replacement parts.
12.1 Maintenance Work
As with every machine, this caravan requires maintenance. The extent and frequency of the main-
tenance work required depend on conditions of operation and use. More difficult operating condi-
tions make it necessary to service the caravan more often.
Inspection and maintenance work may only be carried out by trained personnel.
Special technical knowledge, which cannot be taught within the framework of this instruction manual,
is required for these tasks. Personnel possessing this technical knowledge are available for assist-
ance at all ERIBA service centres. Their experience and regular technical instruction by the factory
as well as equipment and tools guarantee expert and up-to-date maintenance of the caravan.
In the inspection record of this instruction manual, the ERIBA service centre will confirm any work
carried out.
> Note the inspections listed in the inspection record and have them carried out at the
specified intervals. The value of the caravan is thus preserved.
> The inspection record also serves as valid proof in the case of damage and claims un-
der the guarantee.