Instruction manual

10 Sanitary Fittings
104 Touring - 03/11-1 - englisch (EN) - 0731070 - HYW-0102-01EN
Fresh water tank:
Position the caravan horizontally.
Connect the 240 V power supply and switch
on the 240 V fuse box (Fig. 58 or Fig. 59).
As far as the Power Pack SE with living area
battery is concerned, a 240 V supply is not
necessary.
Close drain cocks for the boiler or hot water
source.
Open the cap on the fresh water tank.
Close the drainage opening in the fresh wa-
ter tank with the stopper (Fig. 84,1) provid-
ed.
Firmly close the fresh water tank again with
the cap.
Open the fresh water filler neck.
Fig. 84 Fresh water tank, stopper
Top up with fresh water. Use a water hose, a water canister with a funnel, or similar for filling.
Set all the water taps to central position "Hot" and open them. This will turn on the water pump.
Keep the taps open until the water flowing out of the taps has no bubbles in it. This is the only
way to ensure that the boiler or the hot water source is also full of water.
Set all water taps to "Cold" and leave them open. This will fill the cold water pipes with fresh wa-
ter.
Keep the taps open until the water flowing out of the taps has no bubbles in it.
Close all the water taps.
Close the fresh water filler neck.
Check that the cap on the fresh water tank is not leaking.