Instruction manual

Sanitary Fittings 10
Touring - 03/11-1 - englisch (EN) - 0731070 - HYW-0102-01EN 103
10.4 Filling the Fresh Water System
With fresh water canister:
Loosen retaining straps at the fresh water canister.
Unscrew the cap of the fresh water canister.
Remove water pump and water hose from the fresh water canister.
Top up with fresh water.
Place water pump in the fresh water canister and close the cap tightly.
Secure fresh water canister with retaining strap.
Set all the water taps to central position "Hot" and open them. This will turn on the water pump.
Keep the taps open until the water flowing out of the taps has no bubbles in it. This is the only
way to ensure that the boiler is also full of water.
Set all water taps to "Cold" and leave them open. This will fill the cold water pipes with fresh wa-
ter.
Keep the taps open until the water flowing out of the taps has no bubbles in it.
Close all the water taps.
> Never operate water pump when the fresh water canister or the fresh water tank is
empty.