Instruction manual
99T-Modell - 13/14 - Ausgabe 08/13 - 2354677 - BUE-0029-14EN
Living
6
The pull-down bed has two locking positions in the uppermost position. The
pull-down bed is securely locked in both locking positions.
Lowering the pull-down bed:
Remove obstacles from the space into which the pull-down bed extends
(e.g. push the seats forward and rotate, remove or move cushions).
Switch off the lamps underneath the pull-down bed.
Pull out the release area (Fig. 115,1) at the bottom. The lock is released.
With both hands, pull the pull-down bed down as far as it will go.
If the pull-down bed was in the uppermost locking position: Pull the release
area out again to override the second locking position. With both hands,
pull the pull-down bed down as far as it will go.
Make sure that the pull-down bed is in the lower end position and is not
resting on obstacles such as headrests or cushions.
Lifting the pull-down bed:
Switch off the reading lamps in the pull-down bed.
Using both hands, push the pull-down bed upwards as far as the first
locking position. If necessary, push the pull-down bed further upwards as
far as the uppermost locking position. When doing this, ensure that the
snap latch engages audibly in the locking bracket.
Check that the pull-down bed is locked correctly. To do this, pull down the
pull-down bed firmly.
Safety net The safety net (Fig. 116,2) and the retaining belts are located underneath the
mattress in the pull-down bed. Only use the safety net if persons are already
in the pull-down bed.
Setting up:
Attach the retaining belts (Fig. 116,1) to the hooks on the ceiling.
Access ladder Always use the provided access ladder (Fig. 116,5) to climb up to the pull-
down bed.
Attaching:
Hook access ladder (Fig. 116,5) to the pull-down bed by attaching the two
hooks (Fig. 116,4) in the holding bar (Fig. 116,3).
Storing away:
Hang the access ladder (Fig. 116,5) from the holding bar (Fig. 116,3) on
the pull-down bed.
Store the access ladder securely.
6.12.6 Pull-down bed, electrically operated (special equipment,
Ixeo series)
Z When closing the pull-down bed, pull the side fabric panels inwards. This
prevents the fabric from getting trapped in the lock of the pull-down bed.
X Switch off the reading lamps in the pull-down bed before the bed is
pushed up. Fire hazard!
X Switch off the reading lamps on the underside of the pull-down bed when
the bed is lowered. Fire hazard!
X The maximum permitted pull-down bed load is 200 kg.
X Do not reach into the area between the bed and the side wall when low-
ering or raising. Danger of bruises!