Instruction manual
96 T-Modell - 13/14 - Ausgabe 08/13 - 2354677 - BUE-0029-14EN
Living
6
6.12.2 Fixed bed (adjustable head section)
Depending on the configuration, the head section of the slatted frame can be
adjusted in several stages.
Raising the head section:
Raise the head section (Fig. 110,2) of the slatted frame to the desired posi-
tion. The support (Fig. 110,1) locks automatically into place.
The head section remains locked in the required position.
Lowering the head section:
Raise the head section (Fig. 110,2) of the slatted frame until the lock is
released.
Guide the head section downwards slowly.
6.12.3 Fixed bed, electrically adjustable (special equipment)
The fixed bed (Fig. 111) can be adjusted in length via a manual control unit.
This simplifies passage around the bed. When the foot section of the bed is
shortened, the head sections are positioned at the same time (Fig. 112).
X Do not let the slatted frame fall down when closing the bed!
Fig. 110 Adjustable head section
Fig. 111 Fixed bed, pulled out Fig. 112 Fixed bed, retracted