Instruction manual

95T-Modell - 13/14 - Ausgabe 08/13 - 2354677 - BUE-0029-14EN
Living
6
Conversion to bed
foundation:
 Swivel the lever (Fig. 107,2) underneath the table-top by 180° in an anti-
clockwise direction. The lifting mechanism in the table leg is unlocked.
 Push the table-top downwards as far as possible and hold it in that position.
In doing so, press from the centre of the table-top.
 Swivel back the lever by 180° in a clockwise direction. The table-top
remains in the lowest position.
Moving the table-top
upwards:
 Swivel the lever (Fig. 107,2) underneath the table-top by 180° in an anti-
clockwise direction. The table-top moves upwards to the limit stop.
 Swivel back the lever by 180° in a clockwise direction. The table-top
remains in the uppermost position.
6.12 Beds
6.12.1 Fixed bed (gas-pressure springs)
A storage compartment is underneath the bed. Lift up the slatted frame to
place items in the storage compartment or to empty it from the inside of the
vehicle.
Opening:
 Lift the mattress forwards.
 Lift slatted frame. The gas-pressure springs (Fig. 109,1) hold the slatted
frame open.
Closing:
 Press the slatted frame downwards against the resistance of the gas-pres-
sure springs.
Fig. 109 Fixed bed