Instruction manual

94 T-Modell - 13/14 - Ausgabe 08/13 - 2354677 - BUE-0029-14EN
Living
6
6.11.3 Lift-off table
Table leg The table leg is screwed into the floor. The table can be lowered via a lifting
mechanism to become a bed foundation.
Adjusting the table-top Depending on the model, the table-top can be rotated, slid in one direction or
slid both lengthwise and crosswise.
Moving in a lengthways
direction:
 Fold lever (Fig. 107,1) downward.
 Move the table-top to the desired position.
 Fold the lever back upwards.
Moving in a crossways
direction:
 Fold lever (Fig. 107,1) downward.
 Move the table-top to the desired position.
 Fold the lever back upwards.
Rotating the table-top:
 Press the release knob (Fig. 108,1) with your foot.
 Rotate the table-top over the table leg into the desired position (locks in
place depending on the model).
 Lock release knob in place.
Fig. 107 Adjustment of lift-off table
Fig. 108 Rotating the table-top
Z Before lowering the table-top, remove the cushions from the benches or
adjust the table-top depending on the installation dimensions.