Instruction manual

93T-Modell - 13/14 - Ausgabe 08/13 - 2354677 - BUE-0029-14EN
Living
6
Insertable table extension The suspension table size can be enlarged by inserting a table extension.
Expanding the table:
 Open catches (Fig. 105,1).
 Raise the table-top (Fig. 104,2) slightly and pull it out as far as possible.
 Set down the table.
 Insert the table extension (Fig. 104,1) and secure it with the catch
(Fig. 105,1).
 Lift the table-top slightly and push back as far as possible.
 Secure the table-top with the catches.
Reducing the table size:
 Open catches (Fig. 105,1).
 Slightly lift the front of the table-top and pull out.
 Remove table extension (Fig. 104,1) and lay it aside.
 Lift the table-top slightly and push back as far as possible.
 Set down the table.
 Secure the table-top with the catches.
Conversion to bed
foundation:
 Lift the front of the table-top by approx. 45°.
 Depending on the model, shorten the table leg to the conversion level.
 Release the lock (Fig. 106,1) on the table top.
 Take the table-top out of the upper retainer.
 Hook the table-top at a 45° angle to the supports into the lower retainer and
place on the floor with the shortened table leg.
 Lock the table-top.
Fig. 104 Insertable table extension Fig. 105 Catch
Z The extension frame beneath the table-top is locked into the mounting rail.
Release the lock before lifting the table-top.
Fig. 106 Lock