Instruction manual

92 T-Modell - 13/14 - Ausgabe 08/13 - 2354677 - BUE-0029-14EN
Living
6
Moving in a lengthways
direction:
 Loosen knurled screw (Fig. 102,1).
 Push the table-top (Fig. 102,2) into the desired position.
 Tighten the knurled screw.
Moving in a crossways
direction:
 Loosen knurled screw (Fig. 102,3).
 Push the table-top (Fig. 102,2) into the desired position.
 Tighten the knurled screw.
6.11.2 Suspension table
Table leg The table leg can be set up at two different heights:
z Normal table height
z Decreased table height (when converting to a bed foundation)
To lower the table, there are the following possibilities (depending on model):
z Replacing the long table leg with a short one
z Folding in one part of the table leg
z Removing one part of the table leg
Table-top Depending on the model, the table-top can be extended.
Swing-out table extension The table surface can be expanded by swinging out the table extension.
Expanding the table:
 Pull the knob (Fig. 103,3) of the lock down and swing out the table exten-
sion (Fig. 103,2).
Reducing the table size:
 Swing the table extension (Fig. 103,2) under the table-top (Fig. 103,1) until
the lock latches in place audibly.
Fig. 102 Moving the table-top (alterna-
tive)
Fig. 103 Swing-out table extension