Instruction manual

91T-Modell - 13/14 - Ausgabe 08/13 - 2354677 - BUE-0029-14EN

Living

The tables' main operation is described below. The type and position of the

operating controls may vary slightly.

6.11.1 Fixed table

Table leg The table leg is screwed into the floor.

The fixed table cannot be used as a bed foundation.

Table-top Depending on the model, the table-top can be slid or rotated.

Adjusting the table-top Depending on the model, the table-top can be rotated, slid in one direction or

slid both lengthwise and crosswise.

Moving the table-top:

 Fold lever (Fig. 100,1) downward.

 Move the table-top to the desired position.

 Fold the lever back upwards.

Rotating the table-top:

 Press the release knob (Fig. 101,1) with your foot.

 Rotate the table-top over the table leg into the desired position (locks in

place depending on the model).

 Lock release knob in place.

Suspension table

z Changeable

z Foldable

z Divisible

z Extendible Hang the table-top from the

top into the bottom mount-

ing rail

z Fold in the table leg

z Change the table leg

z Divide the table leg

Lift-off table

Lifting mechanism z Moveable

z Rotatable

Lower the table

Z Depending on the model, the tables can be adjusted in one or more of the

aforementioned ways.

Table leg Table-top Conversion to bed foun-

dation

Fig. 100 Unlocking of the table top Fig. 101 Unlocking the table leg