Instruction manual

87T-Modell - 13/14 - Ausgabe 08/13 - 2354677 - BUE-0029-14EN
Living
6
Closing:  Pull insect screen at the handle (Fig. 91,1) to the opposite handle of the
Roman shade (Fig. 91,3) and allow to engage.
Opening:
 Press the handle of the insect screen (Fig. 91,1) at the back upwards and
detach the insect screen from the Roman shade (Fig. 91,3).
 Slowly push insect screen at the handle to its initial position.
6.10.3 Omni-Vent skylight with fan (special equipment)
The skylight is equipped with an insect screen, blind and an adjustable fan for
ventilation.
Opening:
 Turn the knob (Fig. 92,1) until the desired opening angle is reached.
Closing:
 Turn the knob (Fig. 92,1) until the skylight is fully closed.
Insect screen To close and open the insect screen:
Closing:
 Using the handle (Fig. 92,4) pull the insect screen across to the other side
of the frame.
Opening:
 Press the handle of the insect screen together. The latch is released.
 Use handle to return the insect screen slowly to its initial position.
Shade To close and open the shade:
Closing:
 Press together the handle (Fig. 92,5) of the shade.
 Pull out the shade to the desired position and release. The shade will stay
in that position.
Opening:
 Press together the handle of the shade.
 Slowly return the shade to its initial position.
Fan If the skylight is open, the interior can be ventilated with the 6-speed fan
(Fig. 92,3). The fan is operated via the operating panel (Fig. 92,2).
Switching on:
 Press the On/Off button (Fig. 93,2). The fan runs in comfort mode (venting
at slowest fan speed).
Z To save the battery, after one hour the fan automatically switches from
level 6 down to level 1.
Fig. 92 Skylight Omni-Vent Fig. 93 Control panel for fan