Instruction manual

83T-Modell - 13/14 - Ausgabe 08/13 - 2354677 - BUE-0029-14EN
Living
6
6.9.5 Roman shades for windscreen, driver's window and front
passenger's window
Depending on the model, the driver's cabin is shaded either with pleated
shades or with Remis Roman shades (special equipment).
Pleated shades The pleated shades are standard equipment on the vehicle.
The pleated shades (Fig. 83,2) are fixed with snap fasteners (Fig. 83,1 and
Fig. 84,1).
Remis Roman shades
(special equipment)
The Roman shades are fixed with magnetic strips and are permanently fitted
to the vehicle inside the frame.
Proceed as described below to open or close permanently installed Roman
shades.
Windscreen
Shading:
 Press the release handles (Fig. 85,1) and hold them down.
 Use the handle (Fig. 85,2) to pull the Roman shade for the windscreen
towards the centre of the window.
 Close the second Roman shade for the windscreen in the same way.
A magnetic catch holds both parts of the Roman shade together in the
centre.
Opening the Roman shade:
 Press the release handles (Fig. 85,1) and hold them down.
 Use the handle (Fig. 85,2) to pull the two halves of the Roman shade for
the windscreen outwards as far as they will go. As you do so, lift the handle
up as high as the locking recess.
 Let go of the release handles (Fig. 85,1) and let them engage.
Fig. 83 Pleated shades on passenger
window
Fig. 84 Fixing of pleated shades
Fig. 85 Roman shade for the wind-
screen