Instruction manual

74 T-Modell - 13/14 - Ausgabe 08/13 - 2354677 - BUE-0029-14EN
Living
6
6.7.1 Holder on the column
The holder for the flat screen is attached to a column.
Positioning:
 Push the release lever (Fig. 66,2) to the side and turn the holder (Fig. 66,3)
with the flat screen to the desired position.
 Press flat screen slightly upward and swivel it to the desired position. Three
different inclination angles may be used.
Storing away:
 Turn flat screen back until the holder (Fig. 66,3) engages in the lock
(Fig. 66,1).
6.7.2 Holder with jointed arm
The flat screen is fastened to a jointed arm.
Positioning:
 Pull the release knob (Fig. 67,3). The jointed arm (Fig. 67,4) is unlocked.
 Swivel flat screen into the desired position.
 Take hold of the flat screen at the top and bottom edge with both hands and
set the desired angle of inclination.
Storing away:
 Turn the flat screen back into the original position until the holder
(Fig. 67,1) engages in the lock (Fig. 67,2).
Fig. 66 Holder on the column
Fig. 67 Holder with jointed arm