Instruction manual

42 T-Modell - 13/14 - Ausgabe 08/13 - 2354677 - BUE-0029-14EN
During the journey
4
If the vehicle is equipped with a Waeco system, a separate LCD monitor
(Fig. 24) is provided for the reversing camera.
If the vehicle is equipped with a Pioneer or Zenec system, the reversing
camera image is stored in the central multimedia/navigation system and dis-
played on the existing LCD monitor (Fig. 25,1 or Fig. 26).
If the engine is running or the ignition is switched on, the reversing camera and
LCD monitor switch themselves on automatically when you engage reverse.
If the engine is running or the ignition is switched on, the reversing camera and
LCD monitor can also be switched on manually via a pushbutton or a switch
on the display.
The system can also be switched off via a pushbutton or the "OFF" button on
the display.
4.5 Driving speed
Fig. 24 LCD monitor for reversing
camera (Waeco)
Fig. 25 LCD monitor (Pioneer) Fig. 26 LCD monitor (Zenec)
Z Further information can be obtained in the manufacturer's instruction
manual.
X The vehicle is equipped with a powerful engine. This means there are
sufficient reserves in difficult traffic situations. This high power enables
a high maximum speed and requires above-average driving ability.
X The vehicle provides a large contact surface for wind. A sudden cross-
wind can be especially dangerous.
X Uneven or one-sided loading affects road performance.