Instruction manual

224 T-Modell - 13/14 - Ausgabe 08/13 - 2354677 - BUE-0029-14EN
Maintenance
12
12.9.1 Recessed halogen light
Halogen bulb 12 V/10 W
The recessed halogen light (Fig. 269,1) is installed flush.
Changing bulbs:
 Use a screwdriver to remove the inner cover ring (Fig. 270,1) from the
housing.
 Use a screwdriver to remove the cover ring with the glass (Fig. 270,2) from
the lower section of the recessed halogen light.
 Remove halogen bulb (Fig. 270,3).
 Put in a new halogen bulb.
 Reassemble the lamp in the reverse order.
12.9.2 Recessed halogen light (flat)
Halogen bulb G4 12 V/10 W
The recessed halogen light (Fig. 271,2) is installed flush with the panel.
Changing bulbs:
 Use a suitable tool (e.g. a screwdriver) to lever out the internal cover ring
with glass disk (Fig. 271,1) from the housing.
 Remove halogen bulb.
 Put in a new halogen bulb.
 Reassemble the lamp in the reverse order.
Fig. 269 Recessed halogen light (flat) Fig. 270 Changing the halogen bulb
Fig. 271 Recessed halogen light (flat)