Instruction manual

204 T-Modell - 13/14 - Ausgabe 08/13 - 2354677 - BUE-0029-14EN
Sanitary fittings
10
10.7.3 Toilet with fixed seat
The flushing of the toilet is fed from the water system of the vehicle.
Flushing:
 Before flushing open the sliding trap of the Thetford toilet. To do this, turn
the slide lever (Fig. 256,1) in an anticlockwise direction.
 For flushing, press the blue flush button (Fig. 257,1).
 After flushing close the sliding trap. To do this turn the slide lever
(Fig. 256,1) in a clockwise direction.
The indicator lamp (Fig. 257,2) goes on whenever the sewage tank has to be
emptied.
10.7.4 Toilet (Dometic)
The flushing of the toilet is fed directly from the water system of the vehicle.
The toilet seat can be rotated into the required position.
Let some water run into the toilet bowl before using the toilet. In order to do so
press the flush button (Fig. 259,3) on the control and operating unit
(Fig. 258,2).
Flushing:
 Before flushing open the sliding trap of the toilet. For this pull out the slide
lever (Fig. 258,1).
 For flushing, press the flush button (Fig. 259,3).
 After flushing close the sliding trap. To do so, push the slide lever back.
The indicator lamp (Fig. 259,2) goes on whenever the sewage tank is filled up
to 3/4.
The indicator lamp (Fig. 259,1) goes on whenever the sewage tank has to be
emptied.
Fig. 256 Thetford toilet Fig. 257 Flush button/indicator lamp
Thetford toilet
Fig. 258 Toilet bowl with control and
operating unit
Fig. 259 Control and operating unit
toilet