Instruction manual

161T-Modell - 13/14 - Ausgabe 08/13 - 2354677 - BUE-0029-14EN

Appliances

Control buttons The control buttons have the following functions:

Display The display (Fig. 196,1) is designed as a touch screen. Touching the symbols

calls up the relevant function.

Start screen The Start screen appears on the display after the heater is switched on. The

Start screen contains the following information:

Adjustment menu The "MENU" button calls up the adjustment menu. The meanings of the indi-

vidual symbols are described in the following table.

The values can be increased or reduced via the "+" or "-" symbols.

Tool menus The various heater functions can be called up and adjusted via the tool menus.

The arrow symbols are used to change between the menus. The meanings of

the individual symbols are described in the manufacturer's instruction manual.

Pos. in

Fig. 196

Button Function

2 MENU Open adjustment menu

Activate heating

Fig. 197 Start screen

Symbol Signification

This symbol appears when the circulating pump is activated

This symbol appears when a switching facility for gas cylinders

is activated

This symbol appears when a voltage of 230 V is present at the

heater

The internal temperature is displayed next to this symbol

The external temperature is displayed next to this symbol if an

external sensor is fitted

Symbol Signification

Set the desired temperature of +5 °C to +30 °C

Set the water temperature in the boiler

Set the heat output in electrical operation

Activate the function "Heating in gas operation"

Call up the enabling menu for the tool menus