Instruction manual

145T-Modell - 13/14 - Ausgabe 08/13 - 2354677 - BUE-0029-14EN
Electrical system
8
8.10.1 12 V fuses
The appliances connected to the 12 V power supply in the living area are
fused individually. The fuses can be accessed in the driver's cabin, on the bat-
teries, on or next to the transformer and on the appliances.
An intact 12 V fuse can be detected by the unbroken fuse element
(Fig. 175,1). If the fuse element is broken (Fig. 175,2), change the fuse.
Before changing fuses, take the function, value and colour of the relevant
fuses from the following specifications. When changing fuses, only use flat
fuses with the values shown below.
Fuses on the starter
battery
The fuses are installed in the vicinity of the starter battery. The starter battery
is on the floor between the seats in the driver's cabin and can be accessed
under a cover.
Fuses on the living area
battery
The fuses are fitted next to the living area battery.
Fig. 175 12 V fuse
1 Unbroken fuse element
2 Broken fuse element
Fig. 176 Fuses on the starter battery
1 Flat fuse 20 A/yellow
(for the refrigerator)
2 Jumbo flat fuse 50 A/red
Fig. 177 Fuses on the living area battery
1 Jumbo flat fuse 50 A/red
(for the transformer/rectifier)
2 Flat fuse 2 A/grey
(for battery sensor, living area bat-
tery)