Instruction manual

117T-Modell - 13/14 - Ausgabe 08/13 - 2354677 - BUE-0029-14EN
Living
6
6.14 Shower connection point for external shower (special
equipment)
Connecting an external
shower:
 Unlock and open the cover (Fig. 156,4).
 Attach hose of the external shower to the quick closure (Fig. 156,3).
Using the shower:
 Switch on the water pump using the switch (Fig. 156,2).
 Adjust the water temperature with the rotary knob (Fig. 156,1) as desired.
 Switch off the water pump using the switch (Fig. 156,2).
Shutting off the shower
connection point:
 Switch off the water pump using the switch (Fig. 156,2).
 Disconnect the hose from the quick closure. The quick closure is equipped
with a check value to prevent any further water from escaping.
 Close the cover (Fig. 156,4) and lock with key.
Emptying:
 Attach hose of external shower to quick closure. The check valve is opened
and the connections can run dry.
 Turn knob (Fig. 156,1) to the centre position.
 Empty the water system (see section 10.5).
X Only use the external shower if there is a gap of at least 1.20 m between
the shower and the nearest electrical device or connection. Risk of elec-
tric shock!
Z If decommissioned for a longer time or if there is a risk of frost, drain the
water system.
Fig. 156 External shower connection
point