Instruction manual

110 T-Modell - 13/14 - Ausgabe 08/13 - 2354677 - BUE-0029-14EN
Living
6
6.13.6 Central bench with divan (Van)
 Convert the table (Fig. 135,3) to a bed foundation (see section 6.11).
 Remove the back cushion (Fig. 135,1) and lay it aside.
 Remove the back cushion (Fig. 135,4) and the seat cushion (Fig. 135,5)
and lay them aside.
 Pull out the bedding box extension (Fig. 136,6).
 Fold the seat base extension (Fig. 136,8) outwards.
 Unfold the additional cushion (Fig. 136,7) and lay it on the table.
 Place the seat cushion (Fig. 137,5) in the centre.
 Place the back cushion (Fig. 137,4) between the seat cushion and the wall.
 Hook the bed widening (Fig. 136,9) into the recesses on the bench seats.
 Place the additional cushion (Fig. 137,10) on the bed widening.
Fig. 135 Prior to conversion
Fig. 136 During conversion
Fig. 137 After conversion
1 Back cushion
2Seat cushion
3Table
4 Back cushion
5Seat cushion
6 Bedding box extension
7 Additional cushion (foldable)
8 Seat base extension
9 Bed widening
10 Additional cushion
Z Depending on the model, the back cushion (Fig. 135,1) can be used
instead of the additional cushion (Fig. 136,7).